Mrnt
Mrnt
If you already have the creator 3 can you provide the USB vendor ID (probably 0x2b71) and the USB Product ID (it will also be a 4 digit hex number...
It is so different from the Creator Max! Yep you are right no USB slave port. It looks like right now it is in the same boat as the FF...
@RenskeB as @jimprince suggested (thanks Brad) capturing a log of the plugin with debugging turned on and uploading it as a zip would be very helpful. A couple of thoughts/questions:...
@RenskeB OK sounds like you may have found the problem with the uploads (the -9 is a new error to me) thanks to @jimprince. Regarding the heating issue, there are...
@RenskeB is uploading to the SD card directly or from Cura working OK for you now? Can we close this?
It looks like there are a couple of things going on: 1. the M109 command (which gets converted to M6 "wait for hot end temperature") is not returning "ok" because...
You know I put in a test for when the printer is waiting for the hot end based on the status it returns - on the older Finder it reports...
Thanks for the log! No, not user error - thanks to your log I have now added the USB ID for the Guider II. Please download ver 0.1.19 and give...
> It's hard to get the attention of today's youth. Ha tell me about it. Once you get it connected can you test if the homing, arrow controls work on...
It looks like the Guider II has the same issue as the Guider IIs, Finder II in that it does not understand the relative movement command (so steps do not...