Mrnt

I need to call it a night I'm afraid. If you want to experiment, I made a dictionary of g-code to try and document what is supported and what they...

Sorry for the long delay in responding. There should not be anything in the plugin that causes the filament to eject. If you are sure the slicer did not add...

Sorry for the delay - did you take a look at octoprint.log with debugging turned on for the FlashForge plugin? Or make a clean log and upload it here. It...

This is very odd because the looking at the log it appears that the printer only starts printing when it gets to 230C. Not sure why it heats to the...

Can you explain what you mean by duplicate/mirror mode? re SD access by OctoPrint: Unfortunately this is severely limited in FlashForge printers, which only support a subset of the G...

Ah got it, I had forgotten that there are independent head dual extruders and was not aware of Idex. I’ll need to investigate, but there’s probably one or more g-code...

Can you confirm the observed behavior is this: when uploading an IDEX file generated by FlashPrint that contains a mirror OR duplicate print to OctoPrint (not SD card) and printing...

Can you delete lines 303 to 305 in `octoprint_flashforge/__init__.py`: ``` # M109 in Marlin = wait for extruder temp : M6 in FlashForge (this may need to be moved to...

Thanks for sharing that - I will take a look when I get a chance. Any help is welcome, especially around testing and debugging issues! What set up are you...

> It's not cooperating so far I'm assuming that you installed this plugin already - what exactly is happening? Are you able to connect to the printer using OctoPrint? If...