InsanityAutomation

I just saw i never submitted what i started to type out the other day... M206 may or may not be desired to affect soft endstop position on the opposing...

The behavior was defined as following the typical paradigm of M106 fans being assumed part cooling fans. It functions through this case, however the OP wants arbitrary fan functions (chamber...

Ive got hardware here as well now and this was discussed face to face at errf. Things are happening behind the scenes...

Ive got many machines in chambers which hold very stable temps. This may work better if comparing to the raw adc readings with temp_hotend[e].raw and compare for any meaningful change,...

I have a spare S71214C plc with an RTD module laying around. The slice hotends can fit a second thermistor in the block, I could set it to data log...

With advanced pause, we allow either behavior with HOME_BEFORE_FILAMENT_CHANGE as the behavior is nearly identical. For consistency sake, I would prefer to see the option in configuration.h to allow or...

Yup, adding the config option as described to allow this behavior is the route I would go.

So you mean #23899

I don't have one, tiny machines is not planning on carrying them currently so they didn't send me one, my marketing contacts that have sent me machines direct in the...

> You have USE_PROBE_FOR_Z_HOMING the probe always probes the bed the probe point is either level with the hotend or the probe point is lower than the hotend. the bed...