FreeJoy

FreeJoy copied to clipboard

I would like to calibrate my axis for a range such as 0-75deg turn then after 80 have a button but limit the axis to stil lbe at 0 when...

wizhippo

When using the Shift function if you have inverted buttons they do not work properly when un-shifted. The state is reversed when not shifted.

01g8r

Hi - has anyone tried a 74hc166 shift register instead of a -165? I thought I had ordered some -165 chips but now realize I ordered -166 chips by mistake....

hberg32

Hey guys i have added an STM32 to my latest Pedals build and its works 100% ........but when i install the configurator onto this PC and fire up configurator ....the...

Equalizer-ZA

Hello all, i have a weird issue with Freejoy + STM32F103C8T6 991A KA 93 MYS 808 + SimHUB Arduino Pro Micro Led RPM. I use firmware 1.7.1b3. Flashing is ok...

Basiliadis

Hey! Is there a way to make a 12-position rotary switch with a resistor ladder function like an Encoder? - using Freejoy So based on if you go up the...

ZebbeBa

Apologies... my install is working just fine but, on startup, sometimes one of the rotary encoder "buttons" will report as pressed. Moving then encoder clears the state and the 50ms...

KartmanCanada

Hello, I'm using Freejoy for making a sim racing steering wheel. For dual clutches I'm using combined axis function, so there are 2 paddles (hall sensors) and a potentiometer (10k)...

MyronIanny

Why are usb+ - grayed out? Can they be used?

2

Hello just wondering why the usb+ - are not used and grayed out, can they be used? Can I use them to connect something else like a screen or another...

115keith

I changed the PID and UID, name and it looks like an Xbox controller in the device manager, but I get no joystick configuration or listing in my USB game...

Almstsobur