FreeJoy

FreeJoy copied to clipboard

WS2811/WS2812B Individually Addressable RGB LED Control?

2

Could we add WS2811 and WS2812 control to Freejoy? Using WS2811/WS2812 really opens up LED backlighting options to us. Powerwise, we would need to interface it with a transistor circuit,...

jrsteensen

(｡･∀･)ﾉﾞHi

5

Hello, I have some problems. The CTS 288 encoder cannot rotate once to trigger the button. After four rotations,00 10,12,02,00 rotate to the left for four cycles,00 02,12,10,00 rotate to...

Bliss233

RKJXM1 debouncing support

2

When RKXJM switches are set as POV+center button configuration, on certain directional presses, the middle button momentarily triggers when the directional press is released. I've play around with the denounce...

recoilfx

USB device not showing after flashing the .hex file

6

Hi again, Thanks for adding MLX90393 to the project. I am currently using Maple mini that is based on STM32F103CBT6. I flashed the .hex file to my board using ST-Link...

SarwarN88

STM Board with FreeJoy Firmware 1.6.2 fail to enumerate and start correctly in Win10

19

On boot from power up, Win10/USB subsystem will fail to enumerate/start the FreeJoy device... I have 3x STM32 boards connected to this system. Unplugging and replugging seems to not help...

KartmanCanada

Joystick device doesn't get recognized by Windows after flashing freejoy firmware

3

I bought 2 [STM32 boards](https://www.aliexpress.com/item/1005001636656122.html?spm=a2g0s.9042311.0.0.ffb74c4doo3a3s) did everything according to the guide and flashed latest firmware via ST-Link v2. Up to this point everything seems fine and no problems. Then when...

tahir51

Feature request: wireless joystick over bluetooth

1

Hello there. First of all, thanks for the perfect firmware and its graphical configurator. I wonder if it is possible to add bluetooth module support to connect to the PC...

TheBeneficent

Would it be possible to make a single axis to be the highest read from 2 analog inputs? It would be great for steering wheel with two analog paddles for...

maberalc

MCP3204

3

thanks for the update. i'm getting values now, but it's not yet usable. it's still jumping around every once in a while like it was with the last release, every...

ivannunyadambiz

Matrix Button Rows Keep Failing

6

Hi I have an STM 32 see attached pic. I have flashed the device successfully with FreeJoy_1_7_0b3.hex and FreeJoy_1_7_0b3.bin using the ST-Link V4 software. I am running FreeJoyQt.exe version 1.7.0b3...

speedbird5