Mark Burton

When I load that project file, it fails...  The log contains this... ``` 2020-11-16 20:09:02,633 - ERROR - [MainThread] UM.Settings.SettingFunction.__init__ [67]: Parse error in function (=3.5) for setting: invalid...

> Could it be because I've modified the Geeetech A20M definitions/extruders (in main Cura folder) to increase the extruders to 5 (for virtual extruders)? Perhaps, I don't know. Now, have...

Can you please provide a sample gcode file, I'll just take a look at that, thanks.

My hunch is that because your start gcode contains M104/M109, cura is failing to realise that the temperature is already 210 when it gets to the first tool change. Could...

So at the moment, when the start gcode contains M10[49], cura doesn't output its own M10[49] and assumes the temperature is still 0 and therefore does the wait when the...

I have created a new CuraEngine.exe that contains a fix for this issue, could you please drop that into your Cura installation and try it out. You can find it...

Hi, you may wish to install the latest release (https://github.com/smartavionics/Cura/releases/tag/20201121) which contains the above mentioned fix and a few other changes.

Hi, yes, I've seen problems like this in the past. If I remember correctly, I needed to remove some other profile files that reference those names shown above. I have...

Sorry, like I said earlier, I have never understood the Cura profile code. I can't help you. You certainly could open a similar issue on UM's repo or the forum...

I think the Cura people are working in this area so it's probably worth waiting to see what they come up with.