sfeakes
sfeakes
Without a connection to the Jandy control panel, AqualinkD can’t really do anything. So it’s failing since it can’t read the serial port /dev/ttyUSB0. Edit. So yes it needs a...
That is how aqualinkd works, but since it gets the information for the UI from the panel itself, there isn’t really any information to show in the UI. Ie it...
AqualinkD will start all the network interfaces, then open serial port and connect to panel. If it can’t open a serial port it will terminate, if it opens the serial...
I was just tuning some tests, and it looks like there is a bug with color light and certain panel versions. So I'm assuming this is a color light. If...
@dadoadk version 2.3.8 has a fix for color lights. Please make sure you have this line uncommented in the config 'rssa_device_id=0x48 '
In the web UI a long button press on the tile will give you the option to program a different color.
Why are you trying to use virtual button for light mode? The Jandy panel can only support light mode on a specific circuit, and AqualinkD is the same. Simply set...
This must be something new on Rev Yg for specific lights. Can you let me know what lights (manufacturer / model) you have, and also what the iAqualink web interface...
I was wondering if Jandy's "infinite watercolors" would be RS485 controlled. Finally someone came out with RS485 controlled LED's. I'm going to need a lot of information from you to...
Thanks so much for that. I'd like to get some detailed RS485 information now if you wouldn't mind. Would you mind doing the following. - Make sure lights are off...