Michael Stegen
Michael Stegen
I checked your video, the EV is not responding quick enough to the current set by the EVSE (or the SmartEVSE is increasing the current too fast) Software version 2.3...
Then you probably have an older SmartEVSE hardware revision. If it says 1 instead of LED on the circuit board, then there is no mosfet on this output pin. You...
If you mean the web page menu, yes the "hamburger" does not work yet. Currently it's only a status page that shows the Phase currents , Charging state and Errors...
Yes, dingo35 is creating a stable 3.5 version, that will have a working webpage. https://github.com/dingo35/SmartEVSE-3.5 Once that's stable, i'll program the controllers with this software by default.
Unfortunately the standard does not allow the charge current to be set lower then 6A.
Yes you can plug it in P1 (the white socket) on the SmartEVSE v3. It's not possible anymore to manually connect it to the 12 pin pluggable connector
Thanks @zharijs for the thorough explanation. To reply to the question of @Ferforfaen , the protocol used on the sensorbox changed to modbus. You can reprogram the pic chip in...
Sure i can add that in a future version. But how to reset the pin in case you forget it somehow? - Allow a PIN reset by holding a button...
What do you mean by this question? The project can be build in MPLABX.
I just heard about this a few days ago. These chargers talk to the car behaving like a DC charger, over ISO 15118 you can indeed request the SOC and...