Tim 'mithro' Ansell
Tim 'mithro' Ansell
Every connector has the test points laid out in a different order / structure in no particular pattern. Please make them all have identical structure / layout between the ports....
When Mike tries to use the AUX channel on the DisplayPort connector, it causes the high speed link to drop. We are currently investigating; From Mike; > Whenever the link...
DisplayPort has an alternative method for detection of a cable / computer via looking for a voltage across the RX port.
For developing FX2 firmware, you can get most of the way using [the cheap "dev boards"](http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR3.TRC0.A0.H0.Xcypress+fx2.TRS0&_nkw=cypress+fx2&_sacat=0) you can get on eBay and other distributors. 
_From @CarlFK on March 22, 2016 5:50_ When I send characters too fast, most of them get dropped. I think the problem was described as: there is no flow control....
Currently microload firmware only works on the Opsis. It loads stuff via the hardware I2C controller with the FPGA emulation something like an EEPROM. This doesn't work on the Atlys...
* https://github.com/mithro/fx2-ftdi-emulation * https://docs.google.com/document/d/1o4jDru_V9IBvkkuhyQb1zBzm_QvzDBo2B5adP2bvahY/edit * https://docs.google.com/document/d/1xGOBDtByU6D7ry2WnLUE_slqmjgId_JAscZK3gMCLug/edit