Tim 'mithro' Ansell

Transfer information from Google Doc to this repo

4

There is a lot of information about the FX2 in [this Google Doc](https://docs.google.com/document/d/15oMrgGfgziHL9kqiRNEF34UaUKkOw0XkG7-D83iEM1s/edit#heading=h.iu3vz1p0u6k2). This information should probably be in this repo. Particularly important is the "Board Connections" section which documents...

Figure out why serial number reading in the FX2 firmware isn't working on the Opsis

3

_From @mithro on June 8, 2016 7:49_ Currently when loading the FX2 firmware on Opsis we are still getting the "fallback" serial number reported in the USB information. ``` [1905564.963987]...

Add PTZ support to uvc device

1

_From @mithro on January 10, 2016 6:35_ _From @shenki on September 3, 2014 5:37_ It appears that the v4l2 uvcvideo device can support PTZ controls, and the kernel has support...

Having the serial port open prevents video from streaming

3

_From @xfxf on August 7, 2016 9:2_ Steps to repo; 1) Connect the HDMI2USB 2) Connect to the serial port using flterm 3) Try and get video from the video...

_From @mithro on January 10, 2016 6:48_ _From @mithro on June 24, 2014 5:57_ Exposing the EDID information and other I2C busses via the USB could be useful for debug...

Add 1080p30 resolution in the FX2 firmware

1

_From @enjoy-digital on January 25, 2016 18:46_ Gateware now supports 1080p30, it would be good to have this resolution available in the FX2 firmware. _Copied from original issue: timvideos/HDMI2USB-litex-firmware#190_

UVC non compliance - GET_DEF(PROBE) not supported

1

_From @mithro on January 10, 2016 6:14_ _From @CarlFK on March 31, 2015 22:45_ so that v4l2-compliance doesn't error: $ v4l2-compliance -d /dev/video1 ``` fail: v4l2-test-controls.cpp(513): g_ext_ctrls worked even when...

Rewrite the FX2 firmware to be understandable

1

_From @mithro on January 10, 2016 6:30_ The FX2 firmware is currently really hard to understand. We should rewrite it to make it easier to understand an extend. This has...

Get the hamsterworks minimal-hdmi working on Opsis board

3

_From @mithro on July 17, 2015 8:1_ _Copied from original issue: mithro/numato-opsis-sample-code#20_