Tim 'mithro' Ansell
Tim 'mithro' Ansell
On the PCB is it marked "UMAC1" and "U23". In the schematic is it marked "JUSBPROM". There should also be a comment in the Cypress FX2 section of the USB...
See the compatibility update in https://hdmi2usb.tv/crowdsupply/opsis/numato/2016/03/16/crowdsupply-updates-for-2016/ > ### Compatibility Update > > During recording LCA, we did discover a compatibility between the Opsis board > and some devices. We are...
Currently the VCCIO for the bank connected to the TOFE connector is connected to VCC3V3. It would be nice if we could allow the TOFE connector to be supplied via...
The Cypress FX2 to used for JTAG programming of the FPGA, so it needs to come up no matter what the FPGA is currently programmed with. Currently if the FPGA...
It is hard to access the FX2 serial port when its directly connected to the FPGA.
This pin is currently connected to Pin 1 and Pin 3. Technically the specification says that this pin should be NC (but most supplies provide power here).
Currently it is labelled "ATX_POWER_SUPPLY" which is kind of misleading.
LVDS outputs can only occur on Bank 0 and Bank 2. The clock loopback output pair is on bank 1.
The files are currently named like follows; ``` $ ls *HDMI2USB* -l -rw-r----- 1 mithro mithro 5577177 Oct 4 00:18 _autosave-HDMI2USB.kicad_pcb -rw-r----- 1 mithro mithro 28585 Jan 4 15:01 HDMI2USB.bak...