makerbase
You can use the Cura Plugin https://github.com/makerbase-mks/Software/tree/master/MKS%20Plugin
Mks plugin, directly extract to the plugin folder in the root directory of cura 
MKS Robin Mini or MKS Robin Nano set leveing in config file: 1、Leveling method set >cfg_leveling_mode 1 #（1:AUTO 0:Manual） 2、If use Manual leveling mode setting parameters >cfg_point_number 5 >cfg_point1:50,50 >cfg_point2:180,50...
Err1: The hot bed exceeds the maximum temperature limit, please check if the thermal interface is shorted; Err2: The nozzle exceeds the maximum temperature limit. Please check if the thermal...
Yes, it will continue to be optimized
@sarakha63 Hello, you can contact us through this email address. [email protected] Thank you for your feedback
https://github.com/makerbase-mks/Software/tree/master/MKS%20Plugin we have updated the Cura Plugin.
@pcollingwood There may be some restrictions on the cura version, and some versions may not be compatible. If you downloaded mks plugin3.3, it may only be available for cura3.3 or...
Now the mks plugin only supports version 3.6, and will update version 4.0 later.
I put it in this file: tft_lvgl_configuration.h #define GRAPHICAL_TFT_ROTATE_180