makerbase

Can you detect that TFT28 is damaged? If so, you can contact our sales to solve this problem. TFT28 will send an instruction and receive the command returned by the...

You can send the command through PC software,like the Pronterface to test your main board firmware is normal.

 I tested it and it is sending instructions normally.

#-------------------------------------------------------------------- ######### Printer type setting ################################## #mainboard firmware setting(marlin:1; repetier:2; smoothie:3) >cfg_firmware_type:1 #machine setting (Normal:1; Delta:2) >cfg_machine_type:1 #baud rate (9600:1; 57600:2; 115200:3; 250000:4) >cfg_baud_rate:4 #multi-language(enable:1, disable:0) >cfg_multiple_language:0 #languages setting(simplified (simplified...

@shearder What is version of your Repetier FW and MKS TFT. You can send the Repetier FW to me and let's check it.

It is mean that the TFT old version is work but the latest version in can't?

Yes, some people have reacted to this problem (checksum line number) before, which will affect the printing. We have solved it in the new version.

Temporarily it is as long as tft24 firmware, because the firmware used by 24 and 32 is not the same. So for the time being, if there is more demand,...

Hello, generally use ramps1.4, you need to cooperate with tft28 (there is a power interface), because the touch screen is not powered on the motherboard. Regarding the problem of communication...

@Peponez About the use of tft28 touch screen for ramps1.4&arduino mega2560 . Can you check the temperature when there is a connection to usb, can you move the motor? However,...