makerbase
1、You cna change it 2、You can use the PIO Build in the lower left corner of the ATOM page, then search for MKS Robin Lite in the dialog box and...
1. I want to confirm whether you can use the host computer to control the motherboard and realize the motor action... 2, the motor noise is large, this has a...
Have tried gcode with other slicing software What model are you using the motor drive and how many subdivisions are set? You can provide some information, we test here
@washeree what is your software version?
It shows that the temperature of the hot bed is 230. Is it under heating or normal temperature? If 230 degrees is displayed at normal temperature, it may be a...
If the value of the test remains the same, the temperature measurement pin on the hot bed is burned out.
You need to consult the seller, if the pins are compatible, then you can use
MKS Robin hardware is open source, you can refer to: https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware
Currently, Marlin 2.0 firmware does not support MKS Robin WIFI.
The MKS Robin hardware schematic is open source, you can check it out: https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin