MKS-Robin icon indicating copy to clipboard operation
MKS-Robin copied to clipboard

Published 20 hours ago • verified publisher icon makerbase-mks

Mks Robin2 Circles printing issue.

Open github051 opened this issue 5 years ago • 2 comments

Mks Robin2 problems:

  1. Printing via USB is not working properly. It is stopping same location even if you restart the printer.
  2. While printing circles lot of click noise is observed from motors.

I am using latest firmware of robin2.

github051 avatar Sep 11 '19 14:09 github051

  1. I want to confirm whether you can use the host computer to control the motherboard and realize the motor action... 2, the motor noise is large, this has a lot to do with the drive. 3, for the second question, I recommend you use MKS TMC2208 or MKS TMC2209, this driver, the mute effect is very good. MKS TMC2208：https://www.aliexpress.com/item/32888980385.html?spm=2114.12010612.8148356.1.5fba18b7vGEtua MKS TMC2209：https://www.aliexpress.com/item/33043140087.html?spm=2114.12010612.8148356.47.5fba18b7Ohqp2m

makerbase-mks avatar Oct 11 '19 07:10 makerbase-mks

Reg Motor Noise issue: I am printing via SD card and also i am using Mks TMC2208 stepper drivers with 1/32 micro steppering. Still the noise is observed only when i am printing Circles. Normal lines are printing ok.

Same settings and same G-Code and Same TMC2208 drives with MKS Robin is printing with out any Noise.

github051 avatar Oct 11 '19 17:10 github051