makerbase
Hi! If M111 S7 is blocked, can it be avoided and MKS has release v1.04 firmware, you can download it and test it.
Hi! You can interchange the pin definitions of E0 and E1 pin.
Hi! I need to know your wiring. Can provide？
You can view the limit settings of the configuration file, which are basically caused by normally open and normally closed.
Usually, compile board firmware, you need set it,like this(Robin as a example): 1. Set your board type and in configuration.h file 2. Set #define SERIAL_PORT -1 3. Build your firmware
Hi, MKS has open sourced the Robin Nano firmware, you can refer to: https://github.com/makerbase-mks/MKS-Robin-Nano-Firmware
Hi! Yes, you can use the above firmware directly, the function is also relatively complete.
MKS Robin Mini connect auto off button by SW，You need to use the NO end of the non-self-locking switch to connect to the SW of the MKS Robin Mini.
Hi! Test the extruder method, the temperature of the extruder's heating head reaches above 170 degrees. You can control the rotation of the extruder D3 is 3.3V power led
MKS Robin Nano V1.2 adds a dedicated BLTOUCH interface, as shown below: