MKS-Robin icon indicating copy to clipboard operation
MKS-Robin copied to clipboard

Published 20 hours ago • verified publisher icon makerbase-mks

Robin Nano + TFT32 - Extruder issue or TFT Issue - Two separate issues.

Open dmerriman11 opened this issue 5 years ago • 2 comments

Hello,

I'm experiencing two separate issues that have been show stoppers thus far.

Issue 1 When flashing the close source firmware my extruder motor has no torque, it will turn without a load, but as soon as I feed filament, it stops. I've adjusted the vRef of the 2208 Driver with no luck.

Issue 2 When flashing Marlin 2.0 open source, my TFT32 screen scrolls down automatically and will not stop, no matter what screen I'm on, it continues to scroll down rendering the UI unusable.

The TFT32 works flawlessly on the close source version, so I know it's not a defective screen.

Thank you in advance for any assistance.

dmerriman11 avatar Feb 17 '20 06:02 dmerriman11

Update: I found a copy of the TEVO Nereus closed source firmware and that seems to have fix the torque issue, however I'm still having the Marlin 2.0 TFT calibration issue.

dmerriman11 avatar Feb 19 '20 02:02 dmerriman11

Hi, MKS has open sourced the Robin Nano firmware, you can refer to: https://github.com/makerbase-mks/MKS-Robin-Nano-Firmware

makerbase-mks avatar Feb 19 '20 02:02 makerbase-mks