geduxas
geduxas
My large board with v3.9 is uptime 7d and 5h, it's from last power loss. Don't had any issues with wifi after #621 my issue was that heishamon is connecting...
@longtom99 one thing that you could do is to attach some serial monitor, and log errors till when it happens.. maybe it could reveal what's happening
Don't think everything is stored on remote.. remote work's as seperate controller, so it's receives setting from pump and stores it for display.
Glad you have additional board, it wasn't tested with additional board till now.. heishamon have to send magic packed to Heatpump to get extended data for energy consumption it could...
Yes connect, and on different socket connect heishamon in listen mode, also enable hex dump and wait for telemetry
There should be 2 connectors, cn-cnt and cn-nmode which are parallel to same serial interface, one you can connect cz-taw1, and another heishamon to get listen for communication.
i cant's see here extended data packet either, does cloud shows energy consumption ?
i am not talking about HA or anything else, i am talking about panasonic cloud, do you get there energy in this setup? als where you have attached heishamon in...
so wait till it appears in cloud, i need to see magic packed for extended data.. maybe there is some clue what's wrong here.. we had found it for main...