geduxas
geduxas
S0 is only for external power meter. Panasonic have it's own power calculation.l but often it's fare from accurate..
Update MQTT setting, becouse topic names have been changed i think.
Which system do you use? Personally i am using home assistant, everything works fine.
It's wrong. Topic should be : panasonic_heat_pump/SetDHWTemp
Ups i was wrong thought mqtt topic is bin. @power-dodge please check MQTT topic base in setting, topic.
> @MrLivelong Did you find the problem? I have a similar issue and values in HA are updated _only_ when HA or MQTT broker is restarted I don't think that...
> manufactured location ... Malaysia Yesterday we have discussed about H generation. And have found that latest H series have SMART DHW support, as J series. So I still think...
interesting findings, just by accident found secret meniu:  and by that there is interesting addresses:  this maps almost same values as we use as model numbers :) maybe...
> Maybe not All , but for sure some of them could be find , most of them in hex values . ( At least now we know what is...
> Do you use s0 kWh meter? I had some customers with a specific kWh meter which caused a lot of noise on the GND of the heishamon causing these...