Ed ter Bak

heishamon.yaml updated

20

HomeAssistant changed the designation of mqtt sensors and switches. [https://www.home-assistant.io/integrations/switch.mqtt/](url) [https://www.home-assistant.io/integrations/sensor.mqtt/](url) This impacted **heishamon.yaml.** I have updated it already, and it is ready to use. working with HomeAssistant from release...

Hi, I looked into some stuff today because I needed the info. I found that inside the [HeishaMon-x.x.zip] file, there is a file "MQTT-Topics.md" which needs a little correction. It...

Hi, first off: Great work. Easy to use and you quickly get a good result. Current solution works flawlessly, but I would like the option to reduce the height of...

Defrost state not shown in graph

1

For some weird reason the defrost state (0/1) is not shown in the graph on Energy tab > Efficiency chart

After an update or fresh install, the sent setpoint is not shown the first couple of times. Only after toggling the setpoint x number of times, the logic starts working....

Create a propper GUI for automatic block function with extra visible info.

2

There are now 2 block mechanisms. 1 is an automatic brake when the msg to mqtt > panasonic are going apeshit. 2 is an automated behaviour when manual off is...

All functions responisble for a Set MQTT command will put the source in the var MQTT_Source (Memory Only). When sned to broker a node listens to the Heatpump/command# topic. This...