Thorsten Godau

Not any license, but the GPL, because parts of the code are already licensed under GPL-3.0. To be most compliant, scan the sourcecode, extract all copyrights and all licenses, check...

If you want, you can put the files from [Legal.zip](https://github.com/ttrftech/NanoVNA/files/4894633/Legal.zip) (all ASCII texts) into the root directory of the repository. With those files (for v0.8.0), the project should be a...

Yes. See https://www.experimental-engineering.co.uk/2020/07/04/nanovna-qt-raspberry-pi-appimage-build/. Works very well, but not from the latest development sources...

Really great tool to configure the TonUINO cards very quick. I am using the latest 0.7.0 from F-Droid store and was wondering if the "Spezial-Von-Bis" mode for Album, Party and...

Great stuff, thanks :-)

Hi, so I cross checked the registers of the DS1307 and the DS3231: There are two bitwise differences, but they don't care. All other used registers for time and date...

The blue led is conntected to GPIO5. The red and green LEDs are controlled by the charging circuit and therefore not controllable by GPIOs. See the schematic of the board:...

Hi, is "Wink" currently available for one of the latest flipper firmwares, or do I have to build it on my own on the firmware base I use? I am...

[wink.patch](https://github.com/UberGuidoZ/Flipper/files/12600579/wink.patch) Hi Eric, thanks for the reply. I am not really familiar with this whole Flipper and Git stuff (proud owner of a Flipper since yesterday), but there is a...

Solved with Alex McFadyen's fork (https://github.com/a-c-m/Octolapse). Just put the link "https://github.com/a-c-m/Octolapse/archive/refs/heads/master.zip" into the PluginManager's "... from URL" line and it installs like a charm and works great. Many thanks to...