Thorsten Godau

Lets say 4V/200kR=20µA (not nA), but that is not much either. Far away from being "excessive"... :-) But I agree, there is neither a overvoltage nor a undervoltage protection for...

> I found it is not working in mobile device..... any change? Can not confirm. Works well on a Samsung S7 with FF. But it seems, that beep has the...

Hi, same problem here. The DVMEGA Arduino AMBE board is hardwired to interface McBSP/UART. Together with a hardware reset it seems, that I got a plausible response, but after a...

Hi, I can confirm, that if the DV3000 interface is configured to "none/UART" (2=H, 3=L, 4=H) instead of the default "McBSP/UART" (2=H, 3=H, 4=L), the DVMEGA Arduino AMBEShield (connected to...

Hi David, thanks for the reply. As Matthew mentioned earlyer, he already did the packet mode forcing, but it doesn't seem to work I think. The AMBEServer from nwdigital also...

Thank you very much, well spotted :-) I think if the #define DEBUGLOG is placed before including ArduinoSIP.h in the examples it will work. Maybe it would be best to...

Hi, unfortunately I didn't author the SIP functionality myself, just put Juergen Liegner's code into an Arduino library. So I can not answer your questions (I only used that little...

Yes, I tested also with the official firmware and the "latest .fap". Same there. As soon, as the second message was received the blinking of the LED gets slower. When...

> can you provide raw signals that are causing such issues? Or their full unedited text data? How? I can not choose DAPNET frequency 439.9875 in the Sub-GHz app... Edit:...

Here is some RAW data. These messages (2..4 in sequence) seems not to be separated correctly by the decoder. After getting such message sequences, the LED blinking frequency decreases and...