Thorsten Godau

> > > > where is "... from URL" you refer to? can't find it, I'm using an updated octo4a installation. See https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html Figure 19 Regards, Thorsten

Unfortunately no. The wheel for octolapse still cannot be build. The last message is: `DEPRECATION: Octolapse was installed using the legacy 'setup.py install' method, because a wheel could not be...

That would be great, thanks :-)

Great stuff, thank you very much! Installation was running without problems on my Odroid-C2 with Armbian 23.02.2 (Jammy) and Python 3.10.6. Octolapse v0.4.3+u.d8b2b5b seems to work at least with all...

@FormerLurker "The world is a village" :-D Agree, beautiful area here. The Odroid-C2 is working really great. It's a mature device, several years old, but is has a better performance...

Hi guys, have a Happy New Year all together. Sorry for warming up this discussion again, but this issue is more topical than ever because there are a lot of...

Hi @igrr, ok, I understand the trade-off between effort/cost and benefit, but it still doesn't make sense from a license perspective, especially if the license obligations are then not actively...

In any case the correction should be configurable, because not all GPS modules have the rollover problem...

> That's why I suggest to look at the returned data from the GPS. Ah ok, that wasn't clear for me. But in this case that would make sense...

Hi, i use the method for lauch at boot from the presentation here: https://www.ham-yota.com/wp-content/uploads/2016/06/WSPR_YOTA2016.pdf Installing this systemd sevice as described works fine for me: https://github.com/oe3cts/WSPR-HAT/blob/master/Documents/wsprrypi.service Regards, Thorsten (BTW: I use...