Thorsten Godau
Thorsten Godau
Hi, i tried to cross compile the stuff on a Raspberry Pi 3. The toolchain mentioned at "Prepare ARM Cross Tools" can not be used on a RasPi. But i...
I have about 20 sats in view. It sometimes happens, that i activate the ground track of a satellite, track it, doing some other stuff, listen, switch between sats and...
Hi, in der 5-Tasten-Variante kommt es zur falschen Ansage der Bedienung z.B. bei der Ordnerauswahl bei Erkennen einer neuen Karte, wenn im Admin-Menü die Funktion der Tasten Vol+- / Up-Down...
Hi, would it be possible to offer a prebuild Linux Appimage for Raspberry Pi (ARMHF)? It seems to be possible (see https://www.experimental-engineering.co.uk/2020/07/04/nanovna-qt-raspberry-pi-appimage-build/). Would be really great to see this at...
git reset --hard gd32f303cc_with_bootloader.ld or git reset --hard gd32f303cc_with_bootloader_plus4.ld didn't work for me (git version 2.25.1 on a Xubuntu 20.04 LTS) and gives an error message: "fatal: A 'hard'-reset with...
Hi, building the stuff on a Raspberry Pi 3 "Buster" works very well. I don't use the toolchain from the Raspbian repo (2018-q2), but a more recent (9-2020-q1-update) and well...
#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: 0.4.1 #### Version of OctoPrint OctoPrint Version: 1.8.7 (via [paukstelis](https://github.com/paukstelis/octoprint_install) installation script) ####...
Hi, i tried to cross compile the stuff on a Raspberry Pi 3. The toolchain mentioned at "Prepare ARM Cross Tools" can not be used on a RasPi. But i...
I am using this library at the Elektor ESP32 NTP server project (https://github.com/ElektorLabs/180662-mini-NTP-ESP32) together with a Perthold ST22 GPS module (Skytraq Venus 6 based). Unfortunately the module suffers from the...
Hi, thank you very much for this great project. I can confirm that it is running well on an ODROID GO with the Chimera Core. I was absolutely amazed how...