chofchop

When I investigated, the problem did not occur up to ac355bf, but it seems that the problem has clearly occurred since 9cf3388. I hope this is of some reference. TX...

I confirmed that the problem continues to occur even in v3.5 (not RC). This is just a report.

Although it may not be directly related to your problem, v3.3.2 and v3.3.1 have [serious bugs](https://github.com/ExpressLRS/ExpressLRS/issues/2548) and are very dangerous, so you should not use them.

Yes, the ER6G is an ESP32 receiver (not ESP8285), so issue #2548 does not occur.

[janicecabs-eng](https://github.com/janicecabs-eng), First, check the version of ELRS. v3.3.2 and v3.3.1 contain serious bugs(#2548) and are extremely dangerous as you have experienced, so please never use them. I am currently using...

If the cause of the runaway is #2548 (if you are using firmware v3.3.2 or v3.3.1), a firmware update will fix the problem. In this case, you do not need...

> > If the cause of the runaway is [#2458](https://github.com/ExpressLRS/ExpressLRS/pull/2458) (if you are using firmware v3.3.2 or v3.3.1), a firmware update will fix the problem. In this case, you do...

I searched but nothing came up, but the ER3Ci/ER5Ci V2 is an 8285 receiver, right? (It's not a C3 receiver, right?) If you were to buy one now, wouldn't a...

I would like to join this discussion at a later date. I also agree with [nikpoz](https://github.com/nikpoz) and [MicheleVilla](https://github.com/MicheleVilla). Generally, when |x| increases, it is set as "servo turn speed", and...

> This is a primary control. If you want a different speed then just move the control at the speed you want. As you say. I think I should too....