chofchop
chofchop
Is there a way to try a specific older build to see at what point this issue occurred?
> The issue here is 'turn on' time: the time it takes from power applied to the card responding ready for use. We know exactly when this issue started (#3957)....
>We know exactly when this issue started Since you haven't reproduced the problem I'm experiencing, there's no way you know when the problem started occurring.
I'm trying it now. Please wait a little.
I did the following: 1. I opened the spi-flash-dma branch on Gidpod. https://gitpod.io/#https://github.com/EdgeTX/edgetx/tree/spi-flash-dma 2. I executed the following three lines one by one. cmake -Wno-dev -DPCB=X7 -DPCBREV=MT12 -DDEFAULT_MODE=1 -DGVARS=YES -DFONT=SQT5...
I tried build it again with Gitpod, but the "No SD card" error still persists. This is my feeling and there is no basis for it, but rather than not...
> @chofchop you probably want to ensure you do a DFU flash using Buddy, not just a firmware flash using bootloader I'll try. Please give me a time.
I tried to flash the spi-flash-dma branch firmware with EdgeTX Buddy, but there was no change so far.
If it helps the analysis, I can send you my SD card. You need it?
> Just FYI, there is no _need_ to build the PR firmware yourself unless you want different build options... every PR commit is built automatically... just go to the Checks...