bb-qq
bb-qq
Just to be sure, have you tried turning the connector upside down? https://github.com/bb-qq/r8152/wiki/Troubleshooting#reverse-the-orientation-of-the-type-c-connector If you have already tried this, please let us know the results of lsusb.
@angipp01 Could you attach `start-stop-status.log` and `synopkg.log`? https://github.com/bb-qq/r8152/wiki/Troubleshooting#how-to-investigate-if-the-driver-does-not-work-properly The driver does not seem to be loaded at all. The command you executed during installation may have failed. ``` sudo install...
Just upload the new driver.
It should be able to overwrite without stopping the driver manually.
Is the situation the same with the latest version? https://github.com/bb-qq/r8152/releases/tag/2.19.2-1
At this time, the link speed is not displayed correctly due to a limitation of the Realtek driver. However, if the link speed is Unknown, it means that the link...
I can set the MTU to 9000 from the GUI on my DS918+ without any problems. I think the contents of `synoinfo.conf` may be related to this issue, but I'm...
The source code for this driver is based on that released by Realtek. At the moment I have no plans to make compatible with the new kernel by myself.
Since Synology is still using the version4 series kernel, I have no plans to do anything to support it. The driver source code itself has been updated recently, so the...
Offloading processing to the core is performed on the Linux kernel side, so there is nothing that can be done on the driver side. In general, increasing the MTU size...