UCTRONICS

Hi, For different lens, due to different optical parameters, It doesn't really match the sensor. It exist lens shading issue. It need local engineer support to solve it .

1. What can I do to avoid the lines shown on VGA, 720 and 1080 ? A: The low resolution is got form skipping the high resolution, It is due...

Please attache me your hardware connection. It seems the cable line is too long which will cause the signal very poor.

@Synapse101 It seems the camera does not connect normally. the id of the MT9J001 should be 0x2c01 instead of 0x85F9, please refer to this link to get the detail information...

@DigitalSocrates Hi, How do you connect the camera? Please attach us some pictures for your hardware connection. You‘d better check your I2C bus with an oscilloscope. Arducam support team.

@bqcao Hi, Because the touch driver's resolution is 480x320. You should change your system's resolution to 480x320.

@bqcao Maybe it exist some compatibility issues. the driver is compiled on raspbian-stretch. You can send me your system and I can help you test.

@omiq In order to prevent users from misoperation, we have not provided the password. If you want to know the password, you can contact me via email. [email protected].

@omiq Yes, Our operational people will tell you the detail password and operations

@gitname Thanks very much for your optimizing our code