ArduCAM_USB_Camera_Shield icon indicating copy to clipboard operation
ArduCAM_USB_Camera_Shield copied to clipboard

Published 20 hours ago • verified publisher icon ArduCAM

MT9J001 USB transfer timeout error

Open Synapse101 opened this issue 6 years ago • 4 comments
trafficstars

I have an MT9J001 camera connected to a windows 10 laptop via an Arducam USB 2 camera shield. I can't seem to get the USBTest demo to display a captured image. The camera init was successful but nothing happens when I click on "shot", and I get the "USB transfer timeout error" shown in the image when I click on "play".

Please advise. Capture

Synapse101 avatar Sep 09 '19 13:09 Synapse101

@Synapse101 It seems the camera does not connect normally. the id of the MT9J001 should be 0x2c01 instead of 0x85F9, please refer to this link to get the detail information https://www.arducam.com/docs/camera-breakout-board/10mp-mt9j001-mt9j003/software-guide/

UCTRONICS avatar Sep 10 '19 03:09 UCTRONICS

Hi, thanks for the quick reply. I've followed the examples on the provided link but keep getting the same error. The drivers have been correctly installed and I've double-checked that the cable is correctly connected. The camera code is UC-397 rev A and USB camera shield code is UC-391 rev D. Please advise.

Synapse101 avatar Sep 10 '19 05:09 Synapse101

Please contact us with email: [email protected] and send us your hardware setup photos.

ArduCAM avatar Sep 10 '19 09:09 ArduCAM

Hi, I've sent an email to [email protected] as requested but am yet to receive a reply. Is there any update?

Synapse101 avatar Sep 19 '19 06:09 Synapse101