UCTRONICS

@molder26 Hi, This is due to the library conflict. Please delete the Arduino folder from C:\Users\Visual\Documents\ Then reboot your Arduino IDE.

@bunglex Have you try to delete all of the C:\Users...\Documents\Arduino folder?

@bipinpcl22 If so, I advise you delete the Arduino IDE and re-install it.

@dider7 The baud rate of the serial port determines the transmission speed.

Hi, Thanks for your business. As normal , changing the register bank will not effect getting image. I advise you to ensure you have init the sensor following our demo...

@pranjalranjan299 Please refer to this discussion https://github.com/ArduCAM/Arduino/issues/329

@pranjalranjan299 I have helped you add support it Please replace the ArduCAM.h with the file I attached for you. [ArduCAM.zip](https://github.com/ArduCAM/Arduino/files/2344117/ArduCAM.zip)

@pranjalranjan299 Firstly, does your SPI and I2C interface work normally? Have you detected the camera? I think you should not change any other code. Please let me know more details...

@pranjalranjan299 Have you tried the low baud rate? You can try to set the baud rate to 115200 to try. I have not tested it on MKR1000 platform.

@pranjalranjan299 OK, what's the system of your computer? It seems that has something to do with the PC system. We have tested the Host V2 many times and it works...