UCTRONICS

@atekgul For ArduCAM_Mini_V2.0_Linux_x86_64bit, Please refer to this link: www.arducam.com/downloads/app/ArduCAM_Mini_V2.0_Linux_x86_64bit.zip Step1: Open the terminal and enter the folder of the software Step2: Input：sudo chmod +x run.sh Step3: Input：sudo ./run.sh Step4: Input：sudo...

Please contact my email **[email protected]** and I will send you source code. Thanks for your debug for us.

@joncppl Please try this configuration files [OV5647.zip](https://github.com/ArduCAM/ArduCAM_USB_Camera_Shield/files/3011249/OV5647.zip)

@joncppl [OV5647_MIPI_RAW10.zip](https://github.com/ArduCAM/ArduCAM_USB_Camera_Shield/files/3016384/OV5647_MIPI_RAW10.zip)

@joncppl Do you connect the USB2.0 or USB3.0 interface?

@joncppl This problem is very strange, we in the start interface test is no problem, only on the USB2.0 interface bandwidth problems, I wrote a simple detection function to test...

@joncppl This is a very strange phenomenon. If so, Windows should have the same problem with the instance program. And it does not have this problem on my ubuntu16.0. I...

@Donovator122 You can't comment that which is used to detect the SPI interface. If the SPI interface is error, anything about SPI operation is meaningless. So, please check the SPI...

@Donovator122 Hi, I have checked your wiring diagram. The SPI signal does not pin 10/11/12 you should connect it to ICSP

@Donovator122 I think the fifo length is too short and it is not right. Please ensure the connection wire is as short as possible.