UCTRONICS

@asmagill Hi, We are thinking about this issue, willing to work with you for this issue.

@hunterschoening Hello, Sorry for the bad link. Please download the application from here https://github.com/ArduCAM/ArduCAM_ESP8266_UNO/blob/master/libraries/ArduCAM/examples/ESP8266/ArduCAM_ESP8266_UNO_Capture/Arducam.apk For the detail operations, you can refer to https://youtu.be/n1dDGNpbxGM

@swaxolez @IngmarG We have updated the library today, Please try it again.

@Lucho1976 Hi, You can try add yield like the below code. We suggest you check your hardware connection firstly. Maybe your hardware exist some bad connections. buf[i++] = temp; //save...

@goetmoritz Hi , Please refer to this link to http://www.arducam.com/knowledge-base/esp8266-uno-tutorial/ You can't use esp8266-arduino-core directly wo have changed some files in order to compatible with our board. Regards.

@AhmadZMQ It seems the board's serial port exists some problem. Can you find the serial port number in the device manager? If not, please install the ch340 driver, you can...

@AhmadZMQ OK, maybe the ch340 chip is bad, please contact our salesman and tell us your order number. We will give resend you a new one.

@theopensourcerer Hi, We hope this two link will help you: http://www.arducam.com/knowledge-base/esp8266-uno-tutorial/ http://www.arducam.com/knowledge-base/arducam-typical-problemsarducam-esp8266-uno/ Let us konw if you need more help. Regards, ArduCAM support team.

@selevo It is mainly due to the SPI speed and the wifi signal.

@Donovator122 This due to the serial port is not work normally. Please check your serial port number.