IronOS
IronOS copied to clipboard
Ralim
Open Source Soldering Iron firmware
Assume it's a hardware problem on my end, but maybe I'm missing something: Set up a 2 phase reflow profile, 140° preheat ramping up to 240°, and when activating it...
**Is your feature request related to a problem? Please describe.** I would like to be able to use 12v lead acid batteries to directly power the Pinecil v2 without worrying...
I would like to completely disable the buzzer on the MHP30 Currently, I have an application where the vibration produced by the buzzer is an issue. I would like to...
Hi, I'm the inventor of the [Solder Ninja Pen](https://www.crowdsupply.com/sitron-labs/solder-ninja-pen) and would love to provide backers of the project with the ability to use IronOS instead of the default firmware. 
**Describe the bug** When plugging the Pinecil V2 into a USB-C PD power supply that outputs not only the typical voltages like 5V, 9V, 12V, 20V, but also 28V, the...
**Describe the bug** When powering on the device while outdoors in -15c, the temperature sensor reads approx 600c and the iron will not heat up **To Reproduce** Power on pinecil...
**Describe the bug** The Supertank Pro has 4 ports. Two ports support 100W with PPS, 2 ports QC. All 4 ports are USB-C. When connecting the Pinecil v2 to the...
Device name: FNSRI HS-02A / FNSRI HS-02B Device type: Soldering iron Approximate price: $130 (Canadian moose nickles) Example purchase location: Amazon Hardware details: Processor: Nation N32L403 (ARM CORTEX-M4) @ 64...
**Describe the bug** Same as issue #2047 **To Reproduce** 1. Press '+' to heat up 2. Wait (or try to solder) **Expected behavior** The device should not enter cooldown mode...
Following up on the discussion of Quecoo T85 https://github.com/Ralim/IronOS/issues/1844#issuecomment-2193039764 I have done some PCB investigation. Seems they use SWD interface. The only the only thin that stops me Ive never...
