IronOS
IronOS copied to clipboard
Ralim
Open Source Soldering Iron firmware
* **Please check if the PR fulfills these requirements** - [x] The changes have been tested locally - [ ] There are no breaking changes * **What kind of change...
* **Please check if the PR fulfills these requirements** - [x] The changes have been tested locally - [x] There are no breaking changes * **What kind of change does...
* **Please check if the PR fulfills these requirements** - [] The changes have been tested locally - [] There are no breaking changes * **What kind of change does...
**Describe the bug** I have a Chinese somewhat generic power supply that looks like an "updated PinePower Desktop": it has two USB-A and three USB-C. The last USB-C port supports...
**Describe the bug** Software does not select higher Voltage after PD negotiation **To Reproduce** Plug Iron in USB-PD Supply -> PD-Debug list Voltages but Iron only selects 5V **Expected behavior**...
* **Please check if the PR fulfills these requirements** - [x] The changes have been tested locally - [] There are no breaking changes * **What kind of change does...
**Describe the bug** Hello, i am experiencing some very strange startup behavour on my MH-30 in v2.22. There are 3 startup oprions to choose from, but they do NOT work...
**Describe the bug** Can't load custom logo on TS101 **To Reproduce** Steps to reproduce the behavior: 1. Successfully installed IronOS on TS101.. by following directions [here](https://ralim.github.io/IronOS/Flashing/TS100/) ie, pushing button closest...
**Support request**: G3061 **Description:** The G3061 is a small hotplate with a size of 50x50x35mm with a what looks to be a standard 0.91"128X32 Oled Lcd, that cost no more...
**Describe the bug** Pinecil v2 plugged by standard orange USB-C cable to Samsung PD charger EP-T6530 in socket with PD reboot since temperature higher than 100 °C. Try on original...
