IronOS
IronOS copied to clipboard
Ralim
Open Source Soldering Iron firmware
My Pinecil V2 will not power on even though the power source I'm using meets the correct specs **To Reproduce** Pinecil gets plugged into usb-c1 port on the battery using...
**Describe the bug** After flashing 2.23-RC1 on a newly-purchased TS101, the display is not working properly. **To Reproduce** 1. Flash the firmware on it **Expected behavior** Displays correctly https://github.com/user-attachments/assets/067b8c27-a21a-41d9-b768-ebeca181c134 **Details...
**Describe the bug** ts101 motion sensitivity is not sensitive enough in 2.23rc4 **To Reproduce** flash 2.23rc4 set sensitivity to 9 allow to sleep try to wake it up **Expected behavior**...
The chart in the ReadTheDocs for recommended irons hasn't been updated to reflect Pinecil V1 being not recommended
**Describe the bug** I have flashed the firmware V2.23 RC3 on my Miniware TS101. If I connect the TS101 to a regular (low power) USB-C source, it runs without issues....
**Describe the bug** tl;dr; I have an original, lightly used Pinecil V2 tip that works perfectly fine with one exception: it breaks PD/QC leaving Pinecil stuck at 5V basic power....
New profuct of Miniware, similar to Sequre S60(P), it uses JBC C210 tips and with 128x32 OLED screen. But it has high power (100W instead of 60W). According to teardown...
* **First build for Sequre Si012 Pro Max** First build for this iron, i´ve been doing a lot of reverse to make this "work". Firmware boots up and all seems...
Currently CJK font has no Korean font, so we need to add extra Korean font to make it work. Rather than that I suggest other way. For latin language it's...
Hi there, Would it at all be possible to implement support for the Sequre SI012 Pro Max iron, I know there was an older issue posted but it hasnt been...
