ModuloFS

Would be very nice if these tools are available in the Plugin and Content Manager as well! Is there any plans to do so?

Had similar behaviour. The root cause of my Problem was a configfile with a fault in it. I see in your config file under your z axis and at the...

Thank you very much for your soft reset hint, i have to try it as soon as possible! Up to now the normal gcode sending functionality with probing and the...

Now i have tried gSender together with original FluidNC and everything works perfectly if you sync both with the soft reset under the shortcut Schift+5! I do not need the...

@cotepat do you still use FluidNC as grbl controller? Since the FluidNC version 3.6.3 / 3.6.4-pre1 togehter with gSender 1.1.4 i get motion interruptions during jogging with speeds over approximatelly...

The problem with motion interruptions have clearly to do with gSender. If i disconnect gSender i can jog the machine with the webUI or with FluidTerm without any issues... @cotepat...

Problem seems to be solved with FluidNC V3.6.4-pre3.

If anybody has connection problems between gSender and FluidNC i can recommend the modification in gSender told by Mitch in this post: https://github.com/bdring/FluidNC/issues/678#issuecomment-1294077552 With this modification you can connect and...

Maybe an easier solution to start with would be a probing function like it is available in linuxcnc: https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G38-probe There you can advice linuxcnc with a comment (PROBEOPEN filename.txt) in...

This sound like the behaviour of my controller, described in issue #667 > Did some more testing. The results are pretty much all over the place but there is a...