MK4duo

MK4duo copied to clipboard

Nextion Enhanced 7" Screen and Graphical Screen Togther 4 Hotends and Heatbed

5

Hello, I am very new to the MK4Duo community and printing but I am making a CoreXY 3D printer and I am planning to involve both graphical Screens From SMART...

mohala

The problem of movement on the axis Z

13

Hi. There was a problem of moving along the z axis on 4.3.8 After the G28 command is applied, the table is lowered, and then the work is broken. The...

pirat777knj

@MagoKimbra Please check if this doesn't break other boards, But our Megatronics requires HW_SPI to combine the LCD and SD card functionality

CineXMike

@MagoKimbra Please check if this doesn't break other boards, But our Megatronics requires HW_SPI to combine the LCD and SD card functionality

CineXMike

SD Card Reader NOT working

26

Hello, first, thank You for the solving the other bugs :) But after update to the newer versions my SDCard slot stopped to work... I flashed my early backuped version...

Hans007a

Extreme acceleration when Lin_advance is activated

5

Hello, I have the following Corexy setup: Board: Raads Display: Nextion Number of extruders: 1 Heated bed Firmware 4.3.8 commit 32646c2d282f26f78501d9d0dafba414b1e63688 Repetier Host V2.1.3 with 4.3.8 eeprom XML. Only the...

Prinz12

the axes are jerked when the G0 G1 command is given without specifying the motion coordinates, I have a CNC with a laser on 1 frame, tried different versions, 4.3.6...

grizlyk

I'm running a 12v 200w bed and an E3D chimera (two hotends) on a RADDS board. I'm blowing the 15a fuse when I turn the bed on, and I set...

Burritobun

MK4.3.9 sd card issues

1

### Issue description I'm using MK4.3.9 dev on a gt2560. My problem is that from lcd I can't see gcode files on the sd card, but I have no problem...

eavoc

Extruder manual moving (from LCD) bug

3

Hello, I found a bug in the last release. Anything is wrong with the manual move the extruders from the LCD display. When I go to the move menu and...

Hans007a