MK4duo
MK4duo copied to clipboard
MKFirmware
MK4duo Firmware Printers 3D for Arduino and Arduino due
sending just a M600 command to the printer on lcd appear the message to wait heather but the heather is not activate and the system miserely hang
**Please, follow this template when opening a new issue: this will help us a lot in the process of helping you.** ### Issue description No axis movement after enabling neopixel...
Firmware version 4.3.3_dev My setup arduino due with 100K epcos thermistor with 4K7 pullup resistor to 3V3 for the bed and chamber. The extruders are on AD595 Normally the pullup...
The thermocouples on ultratronics aren't working for me. I tried selecting -3 and -1 for the temp sensor and both times i get abnormal constant temp values 20000 and 329.9....
The definition of the filament runout pin and the flowmeter pin should be in the board file, like: #define ORIG_FIL_RUNOUT0_PIN 24 #define ORIG_FLOWMETER_PIN 26 and in configuration_pin.h there should be...
Is it possible to implement the display adapter RADDS2LCD? [https://www.thingiverse.com/thing:1740725](https://www.thingiverse.com/thing:1740725) There are already instructions for the repetier firmware in the files section.
The cooler target temperature should not be set to zero at boot/init time, because in this way the cooler starts immediately. Thanks
I would like to extend the already existing support for conventional CNC machines in several ways: 1) Add a compiler flag that can be set in Configuration.h that completely disables...
https://br.mouser.com/ProductDetail/871-B57621C104J62 Termistores NTC 100Kohms Prusa MK2 MK2a
Hello, I decided to switch from the Marlin firmware to the MK4Duo v4.3.6 for my Anet A8 with the 5-key keyboard, since I saw that now there is the possibility...
Metadata
Owner
Metadata
MK4duo Firmware Printers 3D for Arduino and Arduino due