MK4duo

MK4duo copied to clipboard

EEPROM Alert message doesn't disappear

1

After upgrading my mini Kossel based on ATmega2560 with the new MK4duo FW 4.4.0 the LCD displays the following error message for the EEPROM Alert: "ATTENZIONE EEPROM Cambiata. Premere il...

giuliotamberi

SD read error

3

**Please, follow this template when opening a new issue: this will help us a lot in the process of helping you.** ### Issue description The SD card looks and you...

butte22

sd read error

1

Please, follow this template when opening a new issue: this will help us a lot in the process of helping you. Issue description The SD card looks and you can...

butte22

Rumba32v4.4 compilation error

11

from C:\Users\MYHOME\Desktop\MK4duo\MK4duo.ino:352: sketch\src/core/stepper/driver/driver.h: At global scope: sketch\src/core/stepper/driver/driver.h:172:11: error: member 'Driver driver_t::::::x2' with constructor not allowed in anonymous aggregate , x2 ^~ Multiple libraries were found for "Wire.h" Used: C:\Users\MYHOME\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.6.0\libraries\Wire Multiple...

lei111

Compilation error

3

**Please, follow this template when opening a new issue: this will help us a lot in the process of helping you.** ### Issue description Downloaded new fW version and tried...

jmlcatarino

Linear Advance Error only on T1 (Second extruder)

1

Using 4.3.9 Linear advance works fine on T0, but when I switch to T1, I get a bunch of errors : 20:38:48.293 : Acceleration limited. 20:38:48.293 : More than 2...

c3D-Dan

Tool Change Feedrate

8

Sorry to bother you guys, I know you're busy, but could someone explain how to adjust the tool change offset feedrate? Change MAX Feedrate only appears to affect this up...

c3D-Dan

My setup: Nextion 4.3 enhanced RAMPS FD V1 + DUE MK4duo 4.3.9 firmware The nextion does not know any warning after starting the printer. No movement when pressing Nextion keys,...

butte22

T0 and T1 servo positions mixed up

5

Using latest build 4.3.9 Have rocking hotend and using Dondolo dual extruder Bowden . (Hotend 1 to the left, z probe in the middle and hotend 2 to The right)....

c3D-Dan

Hello File name in Nextion scrolling display is normal until the bed levelling process starts. then, the display changes to a weird one all the print long (see attached pics)....

Ratisse