LoganFraser

> The intention of the final X move is to move to just inside the left edge of the left side of the bucket, and does so for a left-side...

Yes, that's correct.

Here is an example of the webtoon mode not marking chapters read one after another. 

I typically tap the lower portion of the screen. This just started happening after updating to 0.10.4 Also it happens on the last page so it just isn't counting the...

> Out of curiosity, why is *return to previous* even necessary? Doesn't the next operation after a toolchange move the toolhead to the start position? Seems like the redundancy is...

Any updates on this? I finally have the adjustments to the base design I wanted (2 buttons per side, easier 3d printing, qwiic wire routed though the center of the...

You don't need a pico, any rp2040 will work. I'm using a Seeeduino Xiao RP2040 for mine, same footprint as the bom part just no qwiic socket. The "official" version...

> I'm working on it occasionally. The USB parts seems to work alright, but I'm having trouble getting the pico to read the sensor Did you make any progress on...

I kind of got held up by the software somewhat being stalled so I shelved the project for now but I think just connecting to pins D4 and D5 should...

I appreciate your pointing out the locations. I'll see if I can get someone from the PrintNC discord to follow up. I'm an electrician/hardware design guy, my programming skills are...