LoganFraser

Decontaminator nozzle_clean script has a bug that affects right-side mounted brush/buckets.

8

The last X move in the nozzle_clean script is as follows: G1 X{bucket_left_width / 4} F{prep_spd_xy} But for a right side mounted bucket, the line needs to be G1 X{bucket_start...

[Bug] webtoon mode not marking last page read

6

## Device information * Tachiyomi version: 0.10.4 * Android version: 6.0.1 * Device: Asus Zenpad ## Steps to reproduce 1. First step Reach the end of the last page of...

Feature request: Portrait Support.

22

There's a bunch of low-cost portable touchscreens with 1080p (1920x1080) that would be great mounted to a CNC in portrait mode. It's not wide enough for XL when I loaded...

feature request: 3d probe operations order (Z first)

3

Currently when selecting "include z", Z axis is probed last, which means z height needs to be very accurately set before probing to ensure the edge is in the correct...

Use G59.3 As TLR - tool length reference

6

Basically add an option to use the G59.3 directly as the TLR - Tool length reference. That way it's persistent between resets, and tools are measured compared to a static...

Feature request: Inactivity timeout for driver enable

1

If this already exists, I couldn't find a reference to it, currently the "enable" pins to external drivers are setup to either disable after a very short delay or be...

Suggestion for securing the nozzle brush

1

An idea for adding a brush securing method, just 2 m2 holes in the front for self-tapping screws into the side of the brush plastic.