GregValiant
GregValiant
At the top of the Github Cura "Issues" Page are three links to common problems. On the far right is a problem that people running Windows 11 have run into....
@HellAholic That looks like another case of an anti-virus not liking something about Cura. Do you see anything in that log snippet that points a finger?
Thanks for the report. _**"These have all occurred following an incident where the set screw for the Y axis in the back left corner of the machine had loosened"**_ This...
Go over to the [UM Forum](https://community.ultimaker.com/forum/106-ultimaker-3d-printers/) and post the problem (you probably need an account. It's free. There are folks there that are very good with UM machines and hopefully...
Changing the "type: from "[]" to "int" is one way. ``` "Overhanging Wall Speeds", "description": "The speed that the Overhanging walls will be printed as a percentage of their normal...
Thanks for the report. Try right-clicking on the desktop icon and select "Run as Administrator" just to see if that will work. It was a problem with some installations of...
I'm not sure I understand this. You want a "Minimum Layer Time Initial Layer" that is different than the regular "Minimum Layer Time"? Do you want this to affect the...
Thanks for the report. Try right-clicking on the Cura desktop icon and select "Run as Administrator". Win11 systems have had some problems with Cura and sometimes running as admin can...
If you open a nozzle file (installation folder and the "variants" sub-folder) and make two changes and do a Save-As you will get the extra nozzles. You may want to...