GregValiant

Yes it does. You can install a "Custom FFF" printer and configure it however you want. If you take the information from the Cura Machine Settings for your printer, and...

I haven't put it up yet. I keep playing with it and it needs more debugging. I don't want a bunch of people yelling at me. I'll put up the...

Thanks for the report. I have noticed this in my own prints so I can confirm this behavior. I have not been able to "tune it out" of my prints....

I ran a print the other day where this still occurred in 5.7.2. There was another report regarding this behavior and members of the Cura team commented so they are...

1. _"Is it possible to add an option to add "mid print layers" for use when printing RC models, for strength and better rigidity, this would be ideal if it...

I'm not personally in favor of "automatic upgrades". You should be notified of new Cura releases if you have "Preferences/General", "Updates" "Check for updates on startup" checked and set to...

You can compare the changes to a profile to it's own "default" settings by reselecting it. That brings up the "keep or discard changes" dialog which has a side-by-side view....

Thanks for the report. I can't duplicate this. This is with "Connect Infill Lines" turned on and with 10 "Gradual Infill Steps". I only checked with Grid and Gyroid and...

Looks to be at least partially model specific. On this one the top surfaces are further apart in the Z and I'm back to the "dots" extrusions of #20643 This...

It looks to me like the Outer Wall Extruder and Inner Wall Extruder are kept separate from the Bottom Surface Skin Extruder. There is no "Initial Layer Wall Extruder" so...