Ultimaker
Minimum 1st Layer Time - {cool_min_layer_time_nr_layer_0}
Is your feature request related to a problem?
Please put in a:
Minimum 1st Layer Time - {cool_min_layer_time_nr_layer_0}
makes adhesive better on 1st layer.
So it is indepndent of the parameter already available here
| {cool_min_layer_time} | Minimum Layer Time | The minimum time spent in a layer. This forces the printer to slow down, to at least spend the time set here in one layer. This allows the printed material to cool down properly before printing the next layer. Layers may still take shorter than the minimal layer time if Lift Head is disabled and if the Minimum Speed would otherwise be violated. |
|---|
Describe the solution you'd like
Describe alternatives you've considered
Affected users and/or printers
Additional information & file uploads
No response
I'm not sure I understand this. You want a "Minimum Layer Time Initial Layer" that is different than the regular "Minimum Layer Time"? Do you want this to affect the print speed of the Initial Layer if it turns out that it's a very small layer? There is a speed setting for "Initial Layer Print Speed" that is available if you have the "Number of Slower Layers" > 0. You can hard-set the print speed there. Bed adhesion is often very machine specific. I've never had a problem with my Ender 3 Pro. I print a lot of PETG and it always requires an adhesion promoter. Larger models still warp but that's just the nature of the material.
