AndrewAkinson
AndrewAkinson
The lack of station is a real problem, as there is no way to identify where the cross section comes from. Adding a joining line would be really useful as...
This is easy to do and a quick win to overcome a tedious manual task, especially for cross section that are not labelled, would need a screen to ask about...
Putting the three readings at the end of a line is better than loosing them. 2 3 4.39 263.56 5.29 ; {from: 4.39 263.60 5.33, 4.39 263.57 5.29, 4.38 263.52...
It would be useful to be able to add notes to splays and legs. My main use of this is to label the first splay with what the station is...
The cross section do not appear on the drawing canvas if they are too far off the edge, this can be solved by expanding the area by using numbers in...
On very steep legs, 80 degrees or so, the compass varies with very little movement of the laser point. This makes it difficult for a person to take a steep...
Thanks for the DMS mod. However you have only done it for the compass, and the clino works in the same way. I would not worry about it too much,...
It would be very useful if a top import (and maybe an export) was available, lots of people converting from PocketTopo do not have a txt version as they where...
Personally I think that this would be better named as Convert to Leg. When this is done it reverts to the toporobot numbering system 1.1 not the next counting number...
When using a total station, the inclination goes from 0 for level to 90 for up, however it works on a 360 scale so 270 is down and 359.9.... is...