Joaquin de Andres

We have done some research and there is a constrain for the distance between differential pairs of 20mils. We will assume that the distance between the differential pair and other...

The stitching vias are not need. Remove. Add vias side to side with the vias of side change.

We decided to use an existing connector that can be solder in the same place as the magnetics. This is an option: https://www.samtec.com/products/mle-112-01-g-dv-a Then we can test the idea an...

The fence vias for USB where removed only outside the Core footprint. That's ok?

I've removed the USB fence on 4e8fafb1c36114d40d71f8faadc58ee804dc0fb6 because with the change of planes clearance their where "in the air". If their are needed I can add them with the correct...

Closes #60

Commit 0df9afcb43940d4c1e96e6646ec0a5af8dbe7648 closes #49

Commit ed7d097fc276390780eaaa8ddd3efdd2910b98cf closes #50. Check needed.

Fix on dff2e41a65e24b3435abd1085ba273a77f78e4d1

On behalf of the jack connector, the holes were defined in the cutout layer that was lost in the kicad translation.