openFPGALoader
openFPGALoader copied to clipboard
trabucayre
Universal utility for programming FPGA
Hello, I use .mcs file to write new blank spi flash (s25fl256s), but if I do not flash .mcs file with Vivado and Xilinx probe before (for the first time...
Hello, first of all : Thank you for this great project! Good learning stuff, a very useful tool ... and fun :-) ### Goal : My goal is to use...
Jtag frequency : requested 6.00MHz -> real 6.00MHz Parse file Parse /home/hsx/FPGA/linux-on-litex-vexriscv/build/sipeed_tang_primer_20k/gateware/sipeed_tang_primer_20k.fs: Done DONE Jtag frequency : requested 2.50MHz -> real 2.00MHz the program got stuck here without any reactions
I have Xilinx Kintex XC7K325 board and ECP5 color light 75b board and openFPGALoader works fine with ft2232 cable. However, I am not able to load the bitstream using CH347....
I am working with the Tang Nano 20k. This doesn't use a real ft2232 but instead runs some emulation of the ft2232 on a bl616 risc-v CPU. Now this chip...
This definitely worked a few months ago, but I've changed laptops since then and now it doesn't: ``` $ openFPGALoader -b tangnano9k --verbose-level=2 build/counter.fs empty Jtag frequency : requested 6.00MHz...
I use openFPGALoader from yosys-oss-cad-suite on Windows. When I connect to tangnano1k via USB cable, I enter the command `openFPGALoader. exe - b tangnano1k .\Top.fs`, then, ``` unable to open...
i got a tang mega 138k pro which use Gowin GW5AST 138 as main fpga chip, but now openFPGALoader not supported to write its external flash, will support soon? Thank...
Hi, I'm having some trouble getting openFPGALoader to work with my colorlight i5. I'm working inside WSL2 with a custom kernel that has CONFIG_USB_HIDDEV enabled. The usb device is forwarded...
Lattice ECP5 and MachXO3 works very well with openFPGALoader. How can I help to add support for the Lattice ECP3? I thought it is the "same" as ECP5, but maybe...
