teachingtechYT.github.io

teachingtechYT.github.io copied to clipboard

I would like to see if it was possible to have the HOME button generate G28 X0 Y0 followed by G28 Z0 instead of just G28, because G28 alone will...

gscorrea

While reading the PID Autotune guide I noticed that there's a duplicate sentence which I thought was unnecessary. This PR removes the duplicate sentence.

wallace11

Hi there. I have a couple of comments on the [Acceleration Tuning page](https://teachingtechyt.github.io/calibration.html#accel) which might help to clarify the guide for new printers. 1. In the "Acceleration and jerk/junction deviation"...

he-pennypacker

Thanks from one F1 fan to another for this website. I've been using this plus the SuperSlicer calibrations to keep my printer humming. I just installed a new extruder and...

rubyredrick

Retractiontower nozzle slam

1

When starting the retraction tower, the nozzle slams into the bed completly ignoring the z-offset i've dialed in.. Any idea why this happends?

Ligh-one

Hi! I had a question about the video linked below, specifically G34. Assuming you are on a printer without a fixed bed, doesn't G34 for calibrating a dual z-axis with...

Homer-S

Your guide recommends setting max accel and decel to 600. While a velocity of 500 seems high enough for this test it seems 600 accel really limits it and i...

kingtricky

I always use dark theme and it hurts my eyes when reading for a long time on light theme

Kodeyoman

The option to switch to different slicers doesn't work under Firefox - works fine on Chrome

MarkMan0

[Correction] TMC2208 is compatible with Klipper's pressure advance

1

A correction for the pressure advance calibration section: Klipper has patched TMC2208's incompatibility with its version of pressure advance including in standalone mode: https://github.com/Klipper3d/klipper/pull/2597 section: https://teachingtechyt.github.io/calibration.html#linadv Previous: "Linear advance is...

hoffor