tausen

You could try turning the potentiometer to set the photodiode sensitivity -- my guess would be something like this: find the spot where turning it ever so slightly makes a...

It would be interesting to hear whether it is defective or just responds poorly to your diode -- perhaps we have the same issue. I've ordered an extra module and...

> Even from a dark room to a bright light directly shining in it there's no change. Oh, okay -- in that case I guess something is broken... It might...

Here's what I did, @sfritz67:  (sorry for the crude drawing, `2IN+` is connected to `1OUT` and `1IN-`) So this is just a buffer amplifier on the input (which shouldn't...

Perhaps some of the issues you faced are covered in the ESPHome documentation? For issues flashing, I'm thinking particularly of the boot mode pins mentioned here: https://esphome.io/devices/esp8266.html https://esphome.io/devices/nodemcu_esp8266.html https://esphome.io/devices/nodemcu_esp32.html and...

Thanks for the input! > Did you had to change your boot image to enable broadcasting memory transactions in the inner shareable domain (as stated in xilinx confluence page)? I...

> Perhaps changes are only required when generating the boot image with an earlier version of Vivado (I'm using Vivado 2021.1)? I did some further digging and it does seem...

@nunojsa not yet, no - I got sidetracked and will be at least for another week or two. If you have the time, don't hold yourself back on my account...

Has been merged upstream now: https://github.com/torvalds/linux/commit/9327c7e7539371c6f202303d5539afbae006ec72 I guess we can safely close this PR?

Yes, this module was written for Python 2 and has not been updated for a while. There is a PR (#3) that fixes this particular detail, but I suspect a...