Stuart Pittaway
Stuart Pittaway
The V490 boards self calibrate using a "parasite" voltage detection as per the datasheet. This appears to be not required and is actually causing incorrect voltage readings to be returned....
This ticket is to investigate seemingly random reboots of the controller (often related to also losing WIFI STA) with latest firmware version [Release-2023-12-27-12-02](https://github.com/stuartpittaway/diyBMSv4ESP32/releases/tag/Tag-2023-12-27-12-02) May be related to #239
**Describe the bug** I have had a problem with an all-in-one. Communication through module 2 has failed. The red leds were fixed, without flashing. Burning energy. Unbalancing the 36S batteries....
See discussion here.. https://community.openenergymonitor.org/t/does-the-diybms-support-rs485-to-communicate-with-growatt-sph-hybrid-inverters/24823/2 and code.. https://community.openenergymonitor.org/uploads/short-url/pk8blgMgmx0aZPq0WGNVdLKFcp6.ino
It would be very useful to have automatic detection of the controllers selected baud rate, this would prevent needing to reflash firmware when it changes.
If Mqtt is enabled , every 20-30 seconds the controller gives an error that it can`t communicate with modules and/or shunt. If mqtt is disabled no issues. The same applies...
As reported by Jochen Schmidt Version: 7780f30b8fd333e90c7ba5f930b68b447d958c9f Compiled: 2023-02-21T08:54:23.262Z Victron GX reported "Internal error alarm: Alarm". This occurs randomly/infrequently. Inside DIYBMS, The BMSError condition is reached on: 1. Communications failure...
On power up of the controller on IDF 4.4 framework, the below errors are reported. System functionality doesn't appear to be affected by this and looks like an issue with...
The footprints for the NPN transistors are wrong. Base and Emitter are the wrong way around. So the PCB doesnt work. _Originally posted by @janrunejohansen in https://github.com/stuartpittaway/WebastoWBUSInterface/issues/4#issuecomment-1429197757_